|
|
ALASUND
SHIPBROKERS
Limited |
|||
| Main Page | Ship List | The Focus | Markets | Old Photos |
|
News Updated |
Contact us | Newbuildings | Links | |
| |||||||||||||||
|
For Sale
Type of vessel Motor Fishing Stern Trawler
Construction Steel
Launched 1966 Belgium
Length Over All 48.90M
Length between perpendiculars 46.00M
Moulded Breadth 9.95M
Depth in hold from tonne deck to
Ceiling 4.45M
Depth Moulded (to main deck) 6.00M
Depth Moulded (to shelter deck) 8.20M
Net Tonnage 207.26
Propulsion Engine 1650 HP @ 1200 RPM
Crew inc. Master 34
2. CONSTRUCTION The vessel’s construction is of steel, two deck, five watertight bulkheads, double bottom and side tanks, machinery space aft, superstructure forward, factory deck midships, raked bow and transom stern. The vessel has one fish freezer hold with one hatch. The hatch has a steel coaming fitted with an aluminium hatch cover. 3. TOTAL CAPACITIES
Stern Ballast Sea Water 14.9 M3
Fresh water No1 Starboard wing 15.11 M3
No2 Port wing 15.11 M3
Total 30.22 M3
Fuel oil (Diesel): No 1 Starboard Forward 25.51 M3 No 2 Port Forward 25.51 M3 No 3 Centre Forward 12.34 M3 No 4 Double Bottom Port 19.85 M3 No 5 Double Bottom Starboard 19.85 M3 No 6 Double Bottom Port 8.45 M3 No 7 Double Bottom Starboard 8.45 M3 No 8 Port Aft 21.48 M3 No 9 Starboard Aft 22.16 M3 Daily Service Tank 1.80 M3 TOTAL 160.40 M3 Lubrication oil storage tank 2.45 M3 Sundry tanks Dill no 10.70 M3 Dill no 20.35 M3 Black water tank 1.50 M3 4. CERTIFICATION
The vessel is not in class
Statutory Certificates:
Tonnage Certificate issued September 1994
Local general Safety Certificate valid until June 2007
Radio Station Licence issued June 2006
Stability booklet issued October 1999
Last dry dock date June 2006
Last propeller shaft survey June 2006
5. Equipment on deck listed as follows:
Shelter Deck Forward
. Fore peak store lower carton store, open chain locker
. Fore peak store upper plastic packing and cleaning material
. Strapping machine Fore Deck
. Electric anchor windlass single
. Spare anchor
. Hatch to shelter deck. Steel coaming and cover
. Cook’s store with domestic refrigerator - 18°C
Refrigeration room Fore deck
· Three screw compressors, Bitzer, 2 stage,OST 7041, 160 000 fg/h, 45kw motor
· One screw compressor, Bitzer, 3 stage OSN 7461 – K, new 1998, 45kw motor
· Two liquid freon receiver, MATAL
· One oil separator
· Two condensers on deck (port), multi-tube, horizontal, copper-nickel 90/10, 50m3/h
· One horizontal economizer, 0.3m3
· Refrigeration system control panel
Upper deck aft
· Motor room at superstructure (winch room)
· One trawl winch, D.C. motor, CARBE-LAHMEYER AACHEN
· One set of 24 volt emergency batteries
· One 4 drum electric trawl winch (2 main drums & 2 auxiliary drums)
· Four sweep line winches
Shelter deck aft
· One net winch
· Deck house Starboard with small domestic refrigerating compressor, engine room entrance
· Access hatch to main deck, steel coaming and cover
· Deck house Port entrances to lower deck and small store
· Stocker pond door (hydraulic)
6. Monkey Island
· Four 12v batteries
7. NAVIGATION BRIDGE
· One rudder angle indicator, ISEN, IAB/012
· One hydraulic steering wheel, BRUSSELLE, TYPE rsce 1258
· One standard compass magnetic, SENTINEL, Henry Brown + Son, Essex UK
· Three clear view screens (Rotary)
· One chronometer
· One barometer
· One set of International flags in locker
· One refrigerator indesit
· One Navigator’s chair with console
· Telegraph to engine room with display, ACKN
· One chart table with drawers
· One remote control for trawl winch and ME clutch & speed control, GULBINAT and LABOHM
(pneumatic)
· One table and bench set
· One auto pilot, NECO, type 728 MK 11
· One GPS Plotter, FURUNO, type GP-188
· One echo sounder (brand unknown)
· One echo sounder, FURUNO, type FE-881 MK-11
· One echo sounder colour, JRC, type JFV-120
· One radar, KODEN, type MD-3404
· One radar, KODEN, type MD-3830
· One auto pilot, FURUNO, type FAP-55
· One GPS navigator, FURUNO, type GP500 MK-2
· Two compact VHF radio, SAILOR, type RT 2048
· One GPS plotter, FURUNO, type GP 1500
· One intercom 12 point, aiphone
· Three switch panels for all electrical/electronics circuits
· One 2182 kHz watch receiver, SPERRY MARINE, type R501
· One general alarm
· One auto link Lanmar
· 1 x UPS D60
· 1 x mercer computer complete (no speakers)
· 1 x QP 1000 UPS.
· 1 x NAVTEX receiver SNX-200
· 1 x KAVCOMM KV-41T
· 1 x MERCER computer premium complete and speakers
· ICOM HF marine IC-M802
8. RADIO ROOM
· One battery charger, AMPTRON, type 302B, 30/20 Amp
· One antenna coupler, FURUNO, type FS 4000AT
· One single side band radio telephone, FURUNO, type FS-4001
· One desk with drawer and cupboards
· One icon M710 SSB transceiver + icon AT 130 turner
9. ACCOMMODATION
· Master’s cabin on bridge, 2 berths, desk, wardrobe, fridge 5cf, bathroom with
Shower, toilet, washbasin, in good condition
UPPER DECK STARBOARD
· Chief engineer single berth, desk and wardrobe washbasin, good condition
· Factory Manager’s store
· 2nd engineer and factory manager, two berth cabin with desk and wardrobe, good
Condition
· 1 JRC JFC-120 colour echo sounder
· 1 ICOM VHF marine IC-M402
· 1 SENSOR charger 220 VAC SIMRAD
UPPER DECK PORT
· Mate, single berth cabin with desk and wardrobe, washbasin
· Cook/ Bosun two berth cabin with wardrobe,
· Officer’s toilet,
SHELTER DECK
· Port side, four 4 man cabins inboard with lockers
· Washroom with 3 hand basins, two toilets, two showers
· Starboard side, two 4 man cabins
· One 3-man cabin with lockers,
· Mess-room with 2 tables and benches seating 14 crew, and electric hot water urn, 20
litres
· Officer’s mess room, one table, 2 benches seating 8
· Cold store room (domestic) inboard
· TV and video
10. GALLEY
· One 4-plate gas stove
· Pots and pans, crockery
· Hot water urn, 20lt
· Three toasters
· Electrical eyelevel oven
11. FACTORY DECK (Upgrade to HACCP standards)
· Four blast freezers, MATAL, capacity 2720kg each, -35°, 136 galvanised trays
of 20kg in each freezer, each freezer has evaporator coil with four 2.2 kw fans each
· 196 spare 20kg galvanised trays
· 385 small 7kg galvanised trays
· 544 stainless steel shelves of 20kg each
· One stainless steel belt conveyor 10 000 1 x 500 W and 0.5 kw electric drive
· One stainless steel belt conveyor 6 0001 x 60 W and 0.5 kw electric drive
· One stainless steel washing bin 500 x 1200 with legs
· One stainless steel table 500 x 500 with legs
· Five stainless steel freezer packing tables 600 x 1200 with nylon cutting boards
· One stainless steel sorting bin with bin with 9 compartments 6 000 L x 600 W
· One stainless sorting belt conveyor 6 000 L x 600 W with 0.5 kw electric drive
· One electronic scale, SCANVAEGT, model 83/6 with stainless steel to, maximum
weight = 25kg, minimum weight = 400g
· One stainless steel gutting bin 4000 L x 1000 W with fish chute to rinse bin
· Four stainless steel tail cutters with 0.5 kw electric drive
· One stainless steel rinse bin 2 000 x 1 500 x 500
· One stainless steel conveyor with interlocking nylon belt 2 500 L x 600 W
0.75 kw drive
· Various stainless steel chutes totalling a length of 10 000mm
· One stainless steel piano and heading machine with nylon flights, 4 000 L x 500 W
0.75 kw electric drive
· One stainless steel belt conveyor 2 500L x 500 W with 0.5 kw electric drive
· On stainless steel belt conveyor 4 000 x 500 W with 0.5 kw electric drive
· One stainless steel angled belt conveyor 12 000 L x 500 W with 0.75 kw electric
drive and interlocking Nylon belt with flights
· One stainless steel belt conveyor with nylon flights 2 500mm long x 500mm wide
with 0.5 kw electric drive
· One stocker pond of 30 m3 capacity
· One factory bilge pump
· Galvanised Retro-Grid throughout walkways of 60m2 in total
· Factory deck heads and bulkheads fitted and insulated throughout
12. PUMP ROOM
· Two liquid freon pump, WITT, Model GP51, driven by 4 kw motors
13. FISH HOLD
· One refrigerated fish hold - 25°c, of 700m3
· Four evaporators, MATAL, each with 4 fans, 2.2 kw each.
14. ENGINE ROOM
· The main engine is a diesel, CATERPILLAR 3516B electronic 1650 @ 1200rpm, Fully Overhauled June 2007
reduction gearbox ZF 751BW, to the propeller shaft through a two clutch system, i.e.
Ahead and Astern
· Two Auxiliary diesel engines, CATERPILLAR, type 3406, 188 kw at 1500rpm,
driving alternator LEROY-SOMER, type SA 47L4, 235 Kva
· Two sea water centrifugal pumps for auxiliaries with 1.1 kw electric motor
· One synchronising switchboard for two auxiliaries and shore power.
· One black water tank installed Sept. 1997, fitted with high level alarm, capacity 1500 L, fitted
with ALPHA pump, type 02 ½ RA-T and electric motor 3 HP.
· One welding machine, ETARC, type TF 250, 50-250 A, manufactured 1985.
· One battery box with 4 batteries, 12 volt each.
· One workbench with fitted vice and one unfitted spare vice.
· One bench grinder, FEMCO, 1.0 kw.
· One fuel injector test pump
· One cage with electrical changeover for winch gear and overloads.
· One locker with spare fuses, thermometer inserts, hydrometer, lamps.
· One hand pump for lub oil stern tube, SIGMA, K3.
· One fuel transfer pump, positive displacement type, with LEROY-SOMER electric
motor, 5.5kw.
· One stand by hand operated fuel transfer pump, SIGMA.
· One main two stage air compressor, QUINCY, 20m3/h, 3.6 Mpa with 4 kw electric motor.
· One standby air compressor, INGERSOL RAND T7, 4 kw electric motor.
· One fresh evaporator, AQUAMAR, type 4/5A, with attached distillate pump
and motor 1 kw, ejector pump with AEG 2.2 kw motor, and electronic chloride
monitor.
· One diesel fuel purifier, ALPHA LAVAL, type MAB 103B-24\4205-1 with 1.1 kw
motor.
· Two air start receivers, 30 bar, each 0.85 m3.
· One fresh water hydrophore tank with sight glass, 150L, with attached vane type pump and
LEROY-SOMER 2.2 kw motor.Stand by SIGMA hand pump.
· One oily water separator, type SKIT S05, capacity m3/h, automatic dump controls and
monitoring equipment, attached pump and 0.5 kw motor.
· One standby main engine lubrication oil pump, with 5.5 kw motor.
· Two hydraulic oil conditioner, WINSLOW, type 21-1645-DS.
· One diesel auxiliary engine, DEUTZ, type 10-16, V8, with GARBE, LAHMEYER DC generator
type PP90, 200 kw at 1540 rpm for Trawl Winch
· Two attached hydraulic pumps for deck equipment (sweep winches), BRUSSELLE,
type P30
· Six centrifugal pumps with 7.5 kw motor for two condensers, oil cooler, general
service, stand by general service, fire and bilge pump.
· One engine room supply fan with 2.5 kw motor and belt drive.
· One hot water calorifier, electric, 120 litres.
15. STERN GEAR
· One oil lubricated stern tube with SIMPLEX seal.
· One 4 blade phosphor bronze fixed pitch propeller in KORT type nozzle.
· Rudder stock, rudder & steering pedestal removed for survey 2006 new bushes & seals fitted.
· One steering gear unit, 2 rams with auto pilot control, single pump with LEROY-
SOMER 5.5 kw motor.
· One tiller arm with rope blocks for emergency operation.
16. RAMP GEAR
· One hydraulic pump for stocker pond door, with LEROY-SOMER 4 kw motor
GA plan: Available upon request
Price: USD 775.000,-.
Subject to prior sale and price change without further notice. |
